Fab-Saw Jr Portable Rail Saw

Fab-Saw Jr Portable Rail Saw
Fab-Saw Jr Portable Rail Saw on rails Fab-Saw Jr Portable Rail Saw side view
Description Price
$2,695.00
99-229.5-0008 BEARING FOR TOP PLATE FOR FAB SAW JUNIOR STAINLESS STEEL $19.95
99-229.5-0029 PIVOT BLOCK 11929 w/SHOULDER BOLT 100115 FOR FAB SAW JUNIOR $70.00
99-229.5-0036 ARM MOUNT FOR FAB SAW #11928 $32.00
99-229.5-0037 NUT FOR FAB SAW #100004 (#400732) $0.50
99-229.5-0048 BASE PLATE FOR FAB SAW JUNIOR $237.07
99-229.5-0056 MANIFOLD #11934 FOR FAB SAW JUNIOR WATER FEED* $42.68
99-229.5-0059 BEARING BLOCK 11935 FOR FAB SAW JUNIOR $44.90
99-229.5-0061 SHCS 1/4-20 X 1-1/2 SST #100005 (400738) FOR FAB SAW JUNIOR $0.75
99-229.5-0062 ARM PIVOT FOR FAB SAW JUNIOR* $7.95
99-229.5-0063 BHCS 1/4-20 X 3/4 SS FOR FAB SAW JUNIOR* $0.50
99-229.5-0064 SHOULDER BOLT M8SHS FOR PIVOT BLOCK FOR FAB SAW JUNIOR $3.30
99-229.5-0071 WATER FITTING FOR FAB SAW JUNIOR* $31.15
99-229.5-0090 1/4-20 X 1/2 FHCS ZINC FOR FAB SAW JUNIOR $0.32
99-229.5-0097 HOSE ADAPTER FEMALE FITTING FOR FAB SAW JUNIOR* $9.40
99-229.5-0098 HOSE 25FT FOR FAB SAW JUNIOR $20.00
99-229.5-0099 BHCS 1/2-13 x 3/4 ZINCE FOR FAB SAW JUNIOR* $1.55
99-229.5-0101 SCHS 10-24 X 1-1/2 FOR FAB SAW JUNIOR* $0.50
99-229.5-0149 IN LINE GFCI FOR FAB SAW JUNIOR * $70.40
99-414-0031 CAMFOLLOWER 1/2" ECCENTRIC FOR 2-HP FAB SAW $39.95
99-414-0032 CAMFOLLOWER 1/2" FOR 2-HP FAB SAW $21.95

Description

English

The Fab-Saw Junior rail saw is designed for small to large fabrication shops or out on the job site. This Fab-Saw Junior has the capability of using 8" blades that will cut a full plunge cut over 3.5 cm in depth. This Fab-Saw Jr. uses the same rails and configuration as the Fab-Saw. The Fab-Saw Junior is capable of fabricating any kitchen countertop. We stand behind this new saw with a full one year warranty of workmanship which includes the motor and all electrical components. The excruded aluminum rails are straight to .020" in 13'. The rail bottoms are covered in a durable rubber to protect the stone surface.

The saw package includes:

  • 7-1/4" Hypoid Saw (accepts many 8" blades)
  • 120v 13 amp 4300 RPM Type 2 motor
  • Roller guide system
  • Waterfeed attachment with on/off control
  • Uses the same rail system as the Fab-Saw
  • 3 Rails included
  • Standard water fittings
  • GFI (Ground Fault Interrupter)

The 2hp Fab-Saw Jr. are all 110 volt and are wired for a 20amp circuit

Call for availability

Descripción Español

El Fab-Saw Junior vio ferrocarril está diseñado para talleres de fabricación de pequeñas a grandes, o sobre el lugar de trabajo. Este Fab-Saw junior tiene la capacidad de utilizar 8 "hojas que se corte una caída de corte completo de más de 3,5 cm de profundidad. Esta Fab-Sierra Jr. utiliza los carriles y la misma configuración que el Fab-Saw. El Fab-Sierra Junior capaz de fabricar cualquier encimera de la cocina. Estamos detrás de este nuevo vi con una garantía completa de una de mano de obra que incluye el motor y todos los componentes eléctricos. los rieles de aluminio excruded son rectas a 0.020 "en 13 '. Los fondos de ferrocarril están cubiertos en un caucho resistente para proteger la superficie de la piedra.

El paquete incluye vieron:

  •      7-1/4 "hipoides Saw (acepta muchas de 8" hojas)
  •      120v 13 amp 4300 RPM Tipo de motor de 2
  •      Rodillos guía del sistema
  •      Apego Waterfeed con control on / off
  •      Utiliza el sistema ferroviario mismo que el Fab-Saw
  •      3 carriles incluidos
  •      Los equipos estándar del agua
  •      GFI (interruptor de falla a tierra)


El 2hp Fab-Sierra Jr. son todos de 110 voltios y se conectan a un circuito de 20amp

Llamar para disponibilidad

Русский Описание

Fab-Saw Младший железнодорожных пила предназначена для малых и больших магазинов изготовление или на рабочем месте. Это Fab-Пила-младший возможность использования 8 "лезвия, которые сократят полное погружение сократить более 3,5 см в глубину. Это Fab-Saw младший использует те же рельсы и конфигурацию, а Fab-Saw. Fab-Saw Юниор способны изготовления любой кухне столешницу. Мы поддерживаем эту новую пила с полной гарантией на год мастерства, который включает двигатель и все электрические компоненты. excruded рельсам алюминия прямо на 0,020 "в 13 '.Железнодорожных днища покрыты прочным резиновым для защиты поверхности камня.

Увидел пакет включает в себя:

     7-1/4 "Гипоидное пила (принимает множество 8" лезвий)
     120 В 13 А 4300 RPM Тип двигателя 2
     Роликовые направляющей системы
     Waterfeed вложения с включением / выключением
     Использует ту же железнодорожную систему как Fab-Saw
     3 Rails включены
     Стандартное оснащение воды
     GFI (прерыватель замыкания на землю)

2 л.с. Fab-Saw младший все 110 вольт и подключены к схеме 20amp

Позвоните, чтобы доступность

Videos

Important Shipping Information

NOTE: **NO AIR**

Any product with *NO AIR* can be sent 1 day, 2 day, 3 day air but a hazmat fee will apply. You will be contacted for hazmat fees if you choose an air service. There is no fee if shipped ground.

International orders: Please check if this product is shippable to your country. If listed no, we can't ship this product to your country with any method.

Any items marked as HAZMAT are non-returnable.

NOTE: **FREIGHT**

Any product with *FREIGHT* is an item that must be shipped via truck. Additional products will be boxed and banded with your freight item. (if applicable).

For a freight shipment, we assume that your address is a commercial address with either a dock or a forklift capable of moving your freight item.

Due to varying shipment factors, the quote price provided is an APPROXIMATE price quote, you will be contacted with final freight charges along with scheduling a delivery time. Your order will not be charged until we schedule a delivery time.

Also purchase on Amazon.com

Tags

saw rails tracksaw FABSAW
fabsawjr fab-sawjr portablesaw cutting
track track saw

UPC Codes

UPC Code: 842154013259