Lithco Hi-Polish

Hi-polish dresses up polished granite in making it permanently darker, more lustrous, and completely impervious to water. May be used to equalize color deficiencies and even staining, provided the staining is not much darker than the color change in Hi-polish. Puts a higher gloss on most polished surfaces.

Hipolish is a concentrated silicone process for enhancing the appearance of polished granite for a more lustrous finish and making it impervious to water.

Hipolish is best applied by RUBBING it thoroughly into the polished surface with a heavy cloth, or better, the palm of the hand. DO NOT USE A BRUSH. The quantity used and thoroughness of the rubbing action determines the depth of penetration. Make certain that all areas are well impregnated. If any Hipolish should get on steeled or rock surface, remove immediately with Lithco Solvent or naptha, as it will stain steeled or rock surfaces. The cost of Hipolish will average five cents a square foot of coverage in the larger quantities. Do not use the process on a monument until some experience has been gained from use on a sample or granite scrap.